Domohouse

Settings

Language

Choose the interface language.

Timezone

Chart hour display offset. Pick a standard GMT region or choose Custom to enter any offset in minutes.

Water tanks

Max fill height (cm) is the usable water column for each tank shape; firmware maps pressure to height using offset and geometry. Refill thresholds remain in percent of the calibrated span.

Reserve capacity (L) Elevated capacity (L) Reserve sensor offset (cm) Elevated sensor offset (cm) Reserve max fill height (cm) Elevated max fill height (cm) Elevated refill start (%) Elevated refill target (%) Reserve min level (%) Street inlet scan interval (min) Street inlet probe open (ms) Street pressure present threshold (raw) Street fill pump enable (L/min) Elevated pump min flow off (L/min) Pressure ADC average samples (ticks)

Street inlet valve opens on pressure or timed flow probe. Threshold 0 disables pressure-open and uses flow scan only. Values are saved on the device NVS.

Map sensor voltage to 0% and 100%. With the tank empty, capture 0%; with it full, capture 100%. Leave blank to use firmware defaults.

Reserve live reading: — · —

Reserve 0% voltage (V)

Reserve 100% voltage (V)

Elevated live reading: — · —

Elevated 0% voltage (V)

Elevated 100% voltage (V)

Account

Manage your session and user access for this installation.

Signed in as—

Cursor MCP

Run the Model Context Protocol in Cursor against the same House HTTP API this dashboard uses.

Paths and secrets are read from this machine's House panel server (same process as npm start in web/). Sync again after you edit .env or rebuild MCP.

Target API for MCP Compiled MCP server

Resolved by the panel server from your checkout.

Add to generated env

HOUSE_MASTER_REGISTRY_TOKEN (registry / master-http) HOUSE_LIGHT_NOTIFY_TOKEN MASTER_HTTP_HMAC_KEY and MASTER_HTTP_HMAC_KEY_ID HOUSE_MCP_SERVER_TOKEN (MCP HTTP Bearer) Include HOUSE_MCP_ALLOW_PROBE_DANGER=1 (destructive probe tools)

Treat this like your .env: only on trusted networks. Anyone who can open Settings or call the dev assistant URL can read these values.

Snippet for Cursor (mcp.json)

MCP HTTP URL (defaults)

Override with HOUSE_MCP_HTTP_HOST and HOUSE_MCP_HTTP_PORT when starting mcp:http.

Sectors

Manage custom sectors for your home devices.

Sectors

Dashboard

Choose which summary blocks appear on the home tab and in what order. Light groups follow the sector order below.

Device sector order

Edit sector names and order in the Sectors section. Dashboard light groups use this order.

Dashboard components

Arranque de planta eléctrica

Parámetros de la secuencia de inicio, parada y reintentos del generador

Retardo antes de arranque (ms) Duración de arranque (ms) Retardo antes de servo (ms) Tiempo retorno servo (ms) Ángulo objetivo servo (0–90°) Espera para verificar arranque (ms) Máx. reintentos de arranque

Sign in

Network

Mode

Status

Reserve

Transfer pump

Upper tank

Water usage

Electric service

Plant AC output

Source control

Generator

Manual generator control

Startup configuration

Maintenance

Settings

Water tanks

Account

Cursor MCP

Sectors

Dashboard

Arranque de planta eléctrica